SDI200 Pro 2 Channels SDI Capture Card

SDI200 Pro 2 Channels SDI Capture Card

SDI200 Pro: 3Gbps -SDI XI200DE-SDI fully supports SD/HD/3G-SDI, and enables to embed 8-channel audio signals at 48KHz. You can connect it to any devices with SDI interface. Each interface supports SD, HD, or even 3Gb/s SDI speed. It is digital transmission and supports embedded audio....

Product Details

SDI200 Pro

Supported OS

·         Windows7/8/8.1/2008/2008 R2/2012 (x86 & x64)

·         Linux (V4L2 kernel driver source code under NDA, supports x86, x64 & arm architecture)

Supported APIs

·         Windows

·         DirectShow

·         DirectKS

·         Wave API/DirectSound/WASAPI

·         Linux

·         V4L2

·         ALSA

Supported Software

·         VLC

·         VirtualDub

·         OBS

·         xSplit

·         vMix

·         VidBlaster

·         Wirecast

·         Microsoft Media Encoder

·         Adobe Flash Media Encoder

·         Any other DirectShow/V4L2 encoding/streaming software

Input Features

·         Support for input video resolutions up to 2048×2048 pixels

SDI Specific Features

·         Integrated cable equalizer supporting cable lengths up to 230M for HD signals

·         Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS standards

·         Support for 2K (2048×1080) mode

·         Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling

·         Support for 10/12-bit color depth

·         Support for extraction of SMPTE 352 payload identifier

·         Support for up to 8 audio channels at 48KHz

·         Support for extraction of audio formation information & channel status data

·         Limited support of 3Gb-DS: only the first stream can be captured

·         Limited support of 3Gb-DL:

·         2K YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60

·         Other modes: full supported

·         Limited support for capture of the first link of dual link interfaces:

·         YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60

·         YCbCr 4:4:4 10-bit: captured as 4:2:2

·         RGB 4:4:4: R/B sub-sampled

Video Output Formats

·         Support for output image resolutions up to 2048×2048 pixels

·         Support for output frame rates up to 120fps. (Actual output frame rate can be limited by PCIe bandwidth, and at higher image resolutions – above 1280×1024 – by the pixel clock of the on-board video processing hardware. eg. Max frame rate at 1920×1080 = ~80fps. )

·         Support for 4:2:0 8-bit output formats: NV12, I420, YV12

·         Support for 4:2:2 8-bit output formats: YUY2, YUYV, UYVY

·         Support for 4:4:4 8-bit output formats: V308, IYU2, V408, BGR24, BGR32

·         Support for 4:4:4 10-bit output formats: V410, Y410

·         More output formats are supported via Pro Capture SDK for DirectKS

Video Processing Features

·         Two video processing pipelines with ~180Mpixels/s processing bandwidth for each one

·         Full 10-bit video processing

·         Video cropping

·         Video scaling

·         Video de-interlacing

·         Wave

·         Blend top & bottom field

·         Top field only

·         Bottom field only

·         Video aspect ratio conversion

·         Auto or manual selection of input aspect ratio

·         Auto or manual selection of output aspect ratio

·         Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)

·         Video color format conversion

·         Auto or manual selection of input color format & quantization range

·         Auto or manual selection of output color format, quantization range & saturation range

·         Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats

·         Support for Limited or Full quantization range

·         Support for Limited, Full & ‘Extended gamut’ saturation range

·         Video frame rate conversion

·         Video OSD composition

·         Support for PNG OSD image (up to 2048×2048)

·         Support for dynamic loading of RGBA OSD image via SDK

Input Interfaces

·         2x BNC

·         SD/HD/3G SDI

Output Interfaces

·         PCIe Gen2 x4

·         2x SMA (SDI loopback)

Multiple Cards per System

·         Support for multiple cards plugged to one system

·         On-board rotary switch to set card number, with 16 positions from 0 to F

·         System hardware device tree will display “01: Pro Capture AIO” when rotary switch is set to 1, and so on

·         The video and audio device names displayed in your software will include the card number (set by the rotary switch)

Multiple Output Streams

·         Unlimited output streams for any one input channel

·         Independent cropping, aspect ratio, color format, resolution, frame rate, de-interlacing and color adjustment settings for each individual stream

Ultra Low Latency Support

·         Latency of 64 video lines

·         Partial notification mode in SDK

Timestamp & A/V Synchronization

·         Hardware based 100ns high resolution clock

·         Audio frames (192 audio samples) & video frames are stamped with hardware clock

·         Hardware clock can be synchronized across cards (via SDK)

Video Output SG-DMA

·         ~700MB/s per channel DMA bandwidth in PCIe 2.0 system

·         ~400MB/s per channel DMA bandwidth in PCIe 1.0 system

·         Support for auto detection of Intel tiled GPU surface

·         Support for DirectGMA for AMD video adapter chipsets

·         Support for GPUDirect for Nvidia video adapter chipsets


·         Pro Capture SDK for DirectShow for easy integration (Windows)

·         Pro Capture SDK for DirectKS for maximum flexibility & performance (Windows)

Windows Driver Tweaks

·         All options can be controled by three levels of registry key: global level, product level and device level

·         Video, Audio, Crossbar filter names can be customized via registry keys

Firmware Upgrade

·         Multiple cards in one system can be upgraded simultaneously

·         Cards can be upgraded without a system power shutdown (In most cases, even a reboot is not needed)

LED Indicator

·         Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed.

Form Factor

·         Low profile PCIe x4 Add-on Card

·         116.19mm x 68.88mm (without PCI bracket)


·         Low Profile bracket

·         SMA to BNC cable

Power Consumption

·         Max current at 12V ~0.9 A

·         Max current at 3.3V ~0.5 A

·         Max power consumption ~12.4 W

Working Environment

·         Operating temperature: 0 to 40 deg C

·         Storage temperature: –20 to 70 deg C

Relative Humidity: 5% to 90% non-condensing