Pro Convert HDMI Plus

Pro Convert HDMI Plus

Convert one channel of HDMI signal with embedded audio to NDI stream.
Loop-through one channel of HDMI signal with embedded audio.

Product Details

Pro Convert HDMI Plus Specifications:

Convert one channel of HDMI signal with embedded audio to NDI stream.

Loop-through one channel of HDMI signal with embedded audio.

Pro Convert HDMI plus Interface

Supported Web Browser (tested)

  • Microsoft Internet Explorer 11

  • Microsoft Edge

  • Mozilla Firefox version 61 and above

  • Google Chrome version 49 and above

  • Apple Safari 11.1 and above

  • Opera 55.0.2994.44 and above

Supported Software (tested)

  • OBS

  • XSplit

  • vMix

  • VidBlasterX

  • Wirecast

  • streamstar SW

  • mimoLive

  • Any other NewTek NDI-enabled encoding or streaming software

Input Interfaces

  • HDMI

    • DVI-D 1.0

    • HDMI 1.4

Loop-through Interface

  • HDMI

    • DVI-D 1.0

    • HDMI 1.4

Storage Interface

  • SD Card (functions to be developed)

PTZ + TALLY Control

  • Mini-DIN–8 jack

Screw Mounting Hole

  • ¼–20 mounting hole

Network Interfaces

  • 10/100/1000Mbps Ethernet

  • IEEE 802.3af PoE

USB Interface

  • USB2.0 Type B

  • 5V/2.1A power supply

  • USB RNDIS/ECM

Input feature

  • Support for input video resolutions up to 4096x2160

HDMI Specific Features

  • 297MHz HDMI receiver

  • Adaptive HDMI equalizer

  • Support for customized EDID

  • Support for extraction of AVI/Audio InfoFrames

  • Full colorimetry support

  • Support for up to 4096x2160 4:4:4/4:2:2 30fps or 4096x2160 4:2:0 60fps input signals

  • Support for 8 channel IEC60958 audio streams

  • Support for extraction of audio formation information & channel status data

  • Support for extraction of video timing information

  • Support for extraction of 3D format information

  • Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.

NDI® Output Format

  • Support for 4:2:2 8-bit output

  • Support for up to 2048x2160 120fps

  • Support for NDI 3.x

Video Processing Features

  • Video processing pipelines with 160 Mpixels/s

  • Video brightness, contrast, saturation, hue adjustment

  • Video de-interlacing

    • Top field only

    • Bottom field only

  • Video aspect ratio conversion

    • Auto or manual selection of output aspect ratio

  • Video color format conversion

    • Auto or manual selection of input color format & quantization range

    • Auto or manual selection of output color format, quantization range & saturation range

    • Support for RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input color formats

    • Support for YUV BT.601, YUV BT.709, YUV BT.2020 output color formats

    • Support for Limited or Full quantization range

    • Support for Limited, Full & ‘Extended gamut’ saturation range

  • Video frame rate conversion

  • Video mirror flip

NDI® Source Name

  • Support for setting the device name shown in the system using Web UI. By default, the device name is ‘Pro Convert’.

  • Support for setting the source name shown in the system using Web UI. By default, the source name is ‘board-index + serial number’.

  • Support for setting board-index, from 0 to F, through on-board rotary switch

Firmware Upgrade

  • Support for manual update using Web UI

LED Indicator

  • Status LEDs indicate:

    • the state of power supply: on/off

    • Tally: preview/program

    • the state of input signal: locked/unlocked

    • the state of loopthrough signal: loopthrough connected and signal detected/undetected

Form Factor

  • 117.5mm (L) x 66.7mm (W) x 23.4mm (H)

Accessories

  • USB 2.0 A to B Cable

  • 5V/2.1A power adaptor

  • Mini-DIN–8 (PTZ + TALLY) to RS232 (PTZ) + Mini-DIN–8 (TALLY)

  • L-bracket

  • LED matrix panel (optional)

Power Consumption

  • 5V max current: ~1.5A

  • Max power consumption: ~8W

Working Environment

  • Operating temperature: 0 to 45 deg C

  • Storage temperature: –20 to 70 deg C

  • Relative Humidity: 5% to 90% non-condensing

Previous:Pro Convert HDMI 4K Plus Next:Pro Convert HDMI TX

Inquiry