DVI200Pro 2 CH DVI Video Capture Card

DVI200Pro 2 CH DVI Video Capture Card

2 channel dvi pcie video capture card with SDK support windows/linux/Mac operating,resolution up to 2048*2048.

Product Details

DVI200-Pro

Supported OS

  • Windows 7/8/8.1/2008/2008 R2/2012 (x86 & x64)

  • Linux (V4L2 kernel driver source code under NDA, supports x86, x64 & arm architecture)

Supported APIs

  • Windows

    • DirectShow

    • DirectKS

    • Wave API/DirectSound/WASAPI

  • Linux

    • V4L2

    • ALSA

Supported Software

  • VLC

  • VirtualDub

  • OBS

  • xSplit

  • vMix

  • VidBlaster

  • Wirecast

  • Microsoft Media Encoder

  • Adobe Flash Media Encoder

  • Any other DirectShow/V4L2 encoding/streaming software

Input Interfaces

  • 2x DVI-I

    • DVI 1.0

    • HDMI 1.4a (via breakout cable)

    • VGA (via DVI2VGA connector)

    • Component (via breakout cable)

Output Interfaces

  • PCIe Gen2 x4

Input Features

  • Auto scan of video input sources when there is no signal input to the currently selected input source

  • Manual selection of video input source

  • Auto selection of linked (embedded) audio input source when the video input source changes

  • Manual selection of audio input source

  • Support for standard crossbar based on video input source selection

  • Support for input video resolutions up to 2048×2048 pixels

VGA & Component Specific Features

  • 12-bit ADC

  • Support for RGB & YCbCr (YUV) color formats

  • Support for ‘Seperated sync’, ‘Composite sync’, ‘Sync-on-green’ (SOG), ‘Sync-on-luminance’ (SOY)

  • Support for DMT, CEA, CVT, GTF video timings

  • Input signals up to 165MHz pixel rate are digitized with 1:1 sampling

  • Input signals over 165MHz pixel rate can be digitized with horizontal sub-sampling (resulting in some image quality loss – NOT officially supported)

  • Auto detection of RGB & YCbCr color formats

  • Auto or manual sampling phase adjustment

  • Auto horizontal alignment

  • Support for customized video timings

  • Support for customized video resolutions for CVT/GTF timings

HDMI Specific Features

  • 225MHz HDMI receiver

  • Adaptive HDMI equalizer support for cables lengths up to 30M

  • Support for customized EDID

  • Support for extraction of AVI/Audio/SPD/MS/VS/ACP/IRSC1/ISRC2/Gamut InfoFrames

  • Full colorimetry support

  • Support for 8/10/12-bit color depths

  • Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling

  • Support for up to 8-channel IEC60958/IEC61937 audio streams

  • Support for extraction of audio formation information & channel status data

  • Support for extraction of video timing information

  • Support for extraction of 3D format information

  • Support for extraction of Sony/Canon DSLR time code

Video Output Formats

  • Support for output image resolutions up to 2048×2048 pixels

  • Support for output frame rates up to 120fps. (Actual output frame rate can be limited by PCIe bandwidth, and at higher image resolutions – above 1280×1024 – by the pixel clock of the on-board video processing hardware. eg. Max frame rate at 1920×1080 = ~80fps. )

  • Support for 4:2:0 8-bit output formats: NV12, I420, YV12

  • Support for 4:2:2 8-bit output formats: YUY2, YUYV, UYVY

  • Support for 4:4:4 8-bit output formats: V308, IYU2, V408, BGR24, BGR32

  • Support for 4:4:4 10-bit output formats: V410, Y410

  • More output formats are supported via Pro Capture SDK for DirectKS

Video Processing Features

  • Two video processing pipelines with ~180Mpixels/s processing bandwidth for each one

  • Full 10-bit video processing

  • Video cropping

  • Video scaling

  • Video de-interlacing

    • Wave

    • Blend top & bottom field

    • Top field only

    • Bottom field only

  • Video aspect ratio conversion

    • Auto or manual selection of input aspect ratio

    • Auto or manual selection of output aspect ratio

    • Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)

  • Video color format conversion

    • Auto or manual selection of input color format & quantization range

    • Auto or manual selection of output color format, quantization range & saturation range

    • Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats

    • Support for Limited or Full quantization range

    • Support for Limited, Full & ‘Extended gamut’ saturation range

  • Video frame rate conversion

  • Video OSD composition

    • Support for PNG OSD image (up to 2048×2048)

    • Support for dynamic loading of RGBA OSD image via SDK

Multiple Cards per System

  • Support for multiple cards plugged to one system

  • On-board rotary switch to set card number, with 16 positions from 0 to F

  • System hardware device tree will display “01: Pro Capture AIO” when rotary switch is set to 1, and so on

  • The video and audio device names displayed in your software will include the card number (set by the rotary switch)

Multiple Output Streams

  • Unlimited output streams for any one input channel

  • Independent cropping, aspect ratio, color format, resolution, frame rate, de-interlacing and color adjustment settings for each individual stream

Ultra Low Latency Support

  • Latency of 64 video lines

  • Partial notification mode in SDK

Timestamp & A/V Synchronization

  • Hardware based 100ns high resolution clock

  • Audio frames (192 audio samples) & video frames are stamped with hardware clock

  • Hardware clock can be synchronized across cards (via SDK)

Video Output SG-DMA

  • ~700MB/s per channel DMA bandwidth in PCIe 2.0 system

  • ~400MB/s per channel DMA bandwidth in PCIe 1.0 system

  • Support for auto detection of Intel tiled GPU surface

  • Support for DirectGMA for AMD video adapter chipsets

  • Support for GPUDirect for Nvidia video adapter chipsets

SDK

  • Pro Capture SDK for DirectShow for easy integration (Windows)

  • Pro Capture SDK for DirectKS for maximum flexibility & performance (Windows)

Windows Driver Tweaks

  • All options can be controled by three levels of registry key: global level, product level and device level

  • Video, Audio, Crossbar filter names can be customized via registry keys

Firmware Upgrade

  • Multiple cards in one system can be upgraded simultaneously

  • Cards can be upgraded without a system power shutdown (In most cases, even a reboot is not needed)

LED Indicator

  • Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed.

Form Factor

  • Normal profile PCIe x4 Add-on Card

  • 115.9mm x 91.29mm (without PCI bracket)

Accessories

  • 2x DVI2VGA connector

  • 2x DVI-I to HDMI + Component breakout

Power Consumption

  • Max current at 12V ~0.9 A

  • Max current at 3.3V ~0.7 A

  • Max power consumption ~13.0 W

Working Environment

  • Operating temperature: 0 to 40 deg C

  • Storage temperature: –20 to 70 deg C

  • Relative Humidity: 5% to 90% non-condensing


If you want to wholesale dvi200pro 2 ch dvi video capture card from a such factory, Mine Technology is one of the leading DVI Video Capture Card manufacturers and suppliers.

Previous:HD100U USB HDMI Video Capture Card Next:DVI100Pro 1 CH DVI Video Capture PCIE Card

Inquiry